Note* Security devices offer varying levels of deterrent, prevention and protection.
No device or practice can guarantee 100% protection. Neither seller or manufacturer
shall be liable for any loss or damage, direct, incidental or consequential arising
from the use or the inability to use this product.
" iMac CompuLock Anchor" CA0006i (Heavy Duty)
Apple iMac Models with hole in stand. (Latest Models)
1 x 8 mm x 1.5 mtr Stainless Steel bolt cutter resistant cable. 1 x Blocklock locking
device. Two Stainless Steel access disks. 2 x Security Keys to suit. Lifetime warranty.
Notebook Computers (typical installation)
- Locate the pest position for your iMac. Determine the best anchor point. This may
be to loop the cable around a sturdy leg of fixture where it cannot be undone without
unlocking the notebook cable lock.
- If no anchor point is available, an optional anchor plate may need to be fitted.
- Begin the installation at the anchor point. Attach the security cable to fixed location
as shown below, or mount the adhesive anchor plate to underside of desk. (One way
security screws are provided for extra strength.
- Thread the cable through the cable trap (if appropriate).
- Unlock the locking head with the key supplied (the key will remain attached when
unlocked).
- Pass the security cable through the hole in the iMac stand with the other cables
if you desire.
- Locate the security slot on computer and insert the locking pins into the security
slot. Taking care that the locking pins are fully inserted, gently turn the key to
rotate the “T” pin in the slot.
- The key can be removed when the cable is locked.
- Check to see if your cable is firmly attached.
Additional Parts required:
Optional: For no cable trap install
12 mmDrill bit & Drill