Note*Security devices offer varying levels of deterrent, prevention and protection.
No device or practice can guarantee 100% protection. Neither seller or manufacturer
shall be liable for any loss or damage, direct, incidental or consequential arising
from the use or the inability to use this product.
Apple iMac Models with built-in security slot. (Latest Models)
3 x 7 mm Rectangular Hole, just under power connection.
1 x Notebook Lock. 2 x Security Key to suit. Lifetime warranty.
Notebook Computers (typical installation)
Locate the pest position for your iMac. Determine the best anchor point. This may
be to loop the cable around a sturdy leg of fixture where it cannot be undone without
unlocking the notebook cable lock.
If no anchor point is available, an optional anchor plate may need to be fitted.
Begin the installation at the anchor point. Attach the security cable to fixed location
as shown below, or mount the adhesive anchor plate to underside of desk. (One way
security screws are provided for extra strength.
Thread the cable through the cable trap (if appropriate).
Unlock the locking head with the key supplied (the key will remain attached when
Pass the security cable through the hole in the iMac stand with the other cables
if you desire.
Locate the security slot on computer and insert the locking pins into the security
slot. Taking care that the locking pins are fully inserted, gently turn the key to
rotate the “T” pin in the slot.
The key can be removed when the cable is locked.
Check to see if your cable is firmly attached.
IMPORTANT: Be careful to select a flat clean surface. Use the adhesive baking to
hold the plate in position then use the two one-way security screws provided to screw
into wooden surface to provide the strength required for a secure anchor point.
Suggested Cable Securing Methods:
Anchor plate fixed to desk leg. One way security screws need to be used for required
strength and deterrent.
Cable can be looped around table leg or a crossbar ensuring it can’t be un-looped.
Anchor plate can also be fixed to underside of desk and out of sight.
Optional: For Anchor Plate
Drill & Flat Blade Screwdriver
Cable can be passed through desk cable trap and looped to anchor plate fitted to
underside of desk.